clock page 1 of 3 raltron electronics corp. 10651 n.w. 19 th st miami, florida 33172 u.s.a. phone: (305) 593-6033 fax: (305) 594-3973 e-mail: sales@raltron.com web: http://www.raltron.com c9p: pll lvpecl series: ultra hf clock oscillator, lvpecl, +3.3 vdc description: a crystal controlled, high frequency, highly stable oscillator, adhering to low voltage differential signaling (lvpecl) standards. the output can be tri-stated to facilitate testing or combined multiple clocks. the device is contained i n a sub-miniature, very low profile, leadless ceramic smd package with 6 gold contact pads. this miniature oscillator is ideal f or today's automated assembly environments. applications and features: infiniband; fiber channel; sata; 10gbe; network processors; soho routing; switches; common frequencies: 150 mhz; 156.25 mhz; 155.52 mhz; 161.1328 mhz; 212.5mhz; 312.5mhz +3.3 vdc lvpecl frequency range from 750khz to 800 mhz pll multiplication (f>25mhz) miniature ceramic smd package available on tape and reel lead free and rohs compliant absolute maximum ratings: parameter symbol value unit operating temperature range ta -40?+85 c storage temperature range t(stg) -55?+90 c supply voltage vcc +4.6 vdc maximum input voltage vi vss-0.5?vcc+0.5 vdc maximum output voltage vo vss-0.5?vcc+0.5 vdc electrical parameters: parameter symbol test conditions *1 value unit nominal frequency fo 0.75~ 800.00** mhz supply voltage vcc +3.3 5% vdc supply current is 100.0 max ma output logic type lvpecl load connected between each output and vcc ? 2.0 vdc 50 ? output voltage levels voh vol min max vcc-1.025 vcc-1.620 vdc vdc duty cycle dc measured at 50% of vcc 40/60 to 60/40 or 45/55 to 55/45 % rise / fall time tr / tf measured at 20/80% and 80/20% vcc levels 0.7 typ 1.0 max *2 ns fo=155.52mhz 2.6 typ** integrated phase tji rms, fj = 12 khz?20 mhz 5 fo=622.08mhz 2.5 typ** ps fo=155.52mhz. 4 typ ** random period jitter rj using wavecrest analyzer 4 fo=622.08mhz 6 typ ** ps fo=155.52mhz. 30 typ** jitter j acumm. peak to peak jitter tp-p using wavecrest analyzer *4 fo=622.08mhz 40 typ** ps phase noise ( ? f) typ. @155.52mhz 6 ? f= 10 hz ? f= 100 hz ? f= 1 khz ? f= 10 khz ? f =100 khz ? f= 1m hz ? f= 10m hz ? f> 20m hz -60 -90 -120 -125 -121 -121 -140 -145 dbc/hz dbc/hz dbc/hz dbc/hz dbc/hz dbc/hz overall frequency stability ? f/fc op. temp., aging, load, supply and cal. variations 20, 25, 50, or 100 max *3 ppm enable high option; pin 1 output enabled output disabled en dis high voltage or no connect ground 0.7 ? vcc min 0.3 ? vcc max vdc vdc enable low option; pin 1 output disabled output enabled dis en high voltage ground or no connect 0.7 ? vcc min 0.3 ? vcc max vdc vdc
clock page 2 of 3 raltron electronics corp. 10651 n.w. 19 th st miami, florida 33172 u.s.a. phone: (305) 593-6033 fax: (305) 594-3973 e-mail: sales@raltron.com web: http://www.raltron.com 123 4 5 6 . 1 9 7 . 0 0 8 .276 .008 7.0 0.2 5 . 0 0 . 2 indicates pin 1. .079 max. 2.00 max. .200 .100 5.08 2.54 . 1 5 0 3 . 8 1 .055 1.40 typ. . 0 5 0 1 . 2 7 .079 typ. 2.00 typ. .100 2.54 .071 1.80 solder pattern 2.20 .087 *1 test conditions unless stated otherwise: nominal vcc, nominal load, +25 3 c *2 frequency dependent *3 not all stabilities available with all temperature ranges?please consult factory for availability * 4 measured with wavecrest sia-3000a 10,000, cycles no filtering *5 calculated from agilent 5500 phase noise measurements *6 measured with agilent 5500 part numbering system: series symmetry temperature range (c) frequency stability (overall) frequency (mhz) enable/disable c9p: uhf +3.3vdc clock with lvpecl comp. output a: 40/60 to 60/40% t: 45/55 to 55/45% r: 0?+50 s: 0?+70 u: -20?+70 v: -40?+85** k: 20 ppm** i: 25 ppm h: 50 ppm j: 100 ppm 0.75?800.000 enable high ? standard (omit suffix) el; enable low example: -155.520 clock oscillator, 7x5mm package, +3.3 vdc supply voltage, lvpecl output, standard symmetry, 0?+70 c operating temperature range, 50 ppm total frequency stability, 155.520 mhz ** 20ppm stability may not be available at all combinations, please consult the factory for any custom requirements. mechanical parameters: outline tolerance: 0.006? / 0.15mm (unless otherwise specified) pin functions: [1] enable/ disable [2] no connect [3] case ground [4] output [5] comp. output [6] supply voltage marking: c9pash 155.52 ral d/c *0.01 f external by-pass filter is recommended as seen on solder pattern.
clock page 3 of 3 raltron electronics corp. 10651 n.w. 19 th st miami, florida 33172 u.s.a. phone: (305) 593-6033 fax: (305) 594-3973 e-mail: sales@raltron.com web: http://www.raltron.com reflow profile: **rohs compliant**
|